|
Cel-scope3D software all versions |
Recommended options |
|
* Operating System |
Windows XP (any), Vista (any) or Windows 7 (any) 32 or 64 bit
versions
Server versions of windows generally don't have required graphic
card support installed
MAC-OS not supported (sorry)
|
|
* Processors |
Quad Core (or more) CPU Intel i7
Sandybridge 3930, 3960X, 3820, 2700K,2600K
or previous series 950, 970,940,980X etc,
Xeon X5670
i5 or core Duo processors will run but not recommended, they will be significantly slower on
any HD media |
* Graphics card
if two cards are present in the
system
then even better
 |
Must be NVidia, Kepler or Fermi based design preferred eg:
GTX680,GTX580,
GTX570, GTX560, GTX480, GTX470, GTX480M, GTX590
Quadro 4000, 5000, 6000
also suitable but slower:
GTX260, GTX275 etc.
see a graphics card list (but ignore ATI models)
here
note: latest NVidia drivers must be
installed details from
here
Prefer GTX cards made by PNY,ZOTAC or
ASUS*: avoid MSI
cards |
|
* System memory (RAM) |
3GB
or more as fast as possible for motherboard / processor combination
used. |
|
* Hard Disk |
500Mb. Free hard-disk space |
|
* Display Monitor(1) |
Primary monitor can be as small as 1024 x 768
larger sizes to 1920 x 1080/1200 or above are preferable |
* Display Monitor(2) optional
on
2nd port of graphics card |
Can be same as the primary monitor or larger or
smaller.
Alternatively can be 3D type in
interlaced mode such as Zalman, JVC,
Hyundai passive 3D monitors.
Alternatively, 3D picture output
available on HD-SDI or HDMI via capture card if port or extra card
makes this available. 2D output monitor also availalbe in this mode. |
|
* Capture cards |
For dual stream 3D, any pair or dual input car with WDM/DirectShow
drivers
Cards supported with special 3D interfaces:
Blackmagic decklink extreme 3D+
Bluefish444
Epoch 2K Horizon
Bluefish444
SuperNova
For multiplexed 3D ie Side-by-side, top bottom or interlace, then
one input needed:
AJA Kona 3 (consult their site for
DirectShow drivers)
Blackmagic decklink studio 1 or 2 required
Blackmagic decklink duo
Blackmagic decklink quad
Blackmagic intensity (HDMI input) 1 or 2 required
Blackmagic UltraStudio Pro or SD (USB3 port) (only one per system
works)
Deltacast
only (one required for Dual-Stream)
2 x Any IEEE Firewire
port can be used but 2nd port must be
on second card/controller) |
|
* Motherboard |
No specific CEL-SOFT recommendations, but check with
capture card manufacturers' recommendations.
Check there are enough PCIe slots for the capture
cards to be used bearing in mind the
GTX680, 580 or most Quadro graphics
cards occupy a double slot.
*Some ASUS GTX580 versions need 3 slots! |
|
|
|
|
|
